Gas Furnaces

Let us apply our expertise to the installation of your furnace. At Ambient Heating & Cooling we stand behind our word to ensure its properly installed and properly serviced – for extraordinary heating and cooling in the Grand Forks / Fargo Area. 

Call us at 701-757-1294 today!

Brands we carry: Tempstar, Ruud, Goodman, Daikan, Napoleon


Grand Forks/Fargo people in the know turn to Ambient Heating & Cooling for all their HVAC needs. They trust us to provide not only the correct installation and service but also the insight to help them maximize the potential from their systems. Thinking about a gas furnace system of your own? Then, contact us, the Grand Forks/Fargo area heating and cooling experts.

What Is A Gas Furnace?

A gas furnace is an extremely important and useful appliance for people living in cold regions. Also known as a home furnace, it converts gas to heat and is used to keep the circulation of indoor air warm and comfortable for living conditions. As an environmentally friendly option to preserve natural resources like wood, coal and oil to heat homes, natural gas is used in recent times. Some furnaces operate at 95% efficiency which simply means that what you pay for energy is converted into heat for your home’s indoors.

Before going on to understand how a gas furnace works, take some time to know the parts of a furnace. A home furnace is divided into three parts. The first part consists of the burner, heat exchanger, vent and draft inducer. The second is made up of safety devices and controls. The third consists of the blower and air movement. All these parts work in unison to keep the furnace running efficiently. For more information and help choosing, sizing and installing your furnace call Ambient Heating & Cooling today at 701-757-1294!

How does a gas furnace work?

A gas furnace is a forced home air heating system that reacts when the indoor air temperature drops below the programmed setting on a thermostat. The heart of your home furnace is the burner controlled by a thermostat. When the temperature indoors falls below a certain point, the thermostat alerts the furnace which combines air and fuel and the mixture gets ignited by an electronic igniter.  The combusted, hot gas begins to rise through the heat exchanger situated above the burner and heats the air which is circulated throughout the house. The remaining exhaust exits the gas furnace from a vent, which is let outside the house. The whole heating process starts at the heart of the system, which is the furnace controlled by the thermostat. Some furnaces come with two or more burners where huge volumes of air are heated for distribution.  Meanwhile, an electric fan situated inside the furnace pulls in fresh air which comes through a flat, large grill located in the floor, wall or ceiling of the house. Before the fresh air reaches the furnace, it must filtered properly of dust and other particulate matter.  If the cold air is not properly cleaned then it can have an adverse effect on its operation. You need to replace furnace filters every month and also keep the duct vents clean to provide maximum working efficiency and heat to your home. The filtered air passes into an enclosed space known as the plenum which is located opposite to the heat exchanger.  The exchanger then heats the air very quickly which comes from the plenum as a result of high pressure. The hot air is passed out of the furnace and through the ductwork into your home’s indoor spaces. The ignited gases that are used to create the heat are vented through a shaft in the wall or roof. However in some furnace installations, a humidifier is added near the place where the intake duct is located so that the drying out of heated air can be mitigated. Humidifiers are directly connected to the water line by a tiny copper pipe.  Another pipe is also used to drain away the condensation created from the process. Till the temperature inside reaches a specific point, the process is repeated again and again. Only after a certain level, the thermostat stops the furnace from the heating process.  It is important to consider the size of the furnace before installation. The size of the gas furnace should match the size of the indoor spaces meant for heating. If the furnace is too large, it will off repeatedly and short-cycle, which in turn can lead to wear and tear on internal components and spikes in electricity. If the furnace is too small, it will constantly run in cold weather, which will take more energy to warm indoor spaces and therefore increase electricity usage. To help you determine what furnace size to purchase, we will take important points into consideration like your home’s total area for heating and type of insulation used. A well-insulated home goes a long way in keeping your furnace running efficiently and cut back on energy bills every month.  To make sure that you are getting the best furnace for your installation we will make a site visit to the location of the install and discuss the requirements you need to meet.  Call Ambient Heating & Cooling today to get started! 701-757-1294

PRODUCTS
Click on a category below for more information​​

Air Conditioners
Air Handlers & Coils
Boilers
Ductless Systems
Furnaces
Heat Pumps
Thermostats

Some of our clientele base:
Agriculture & Farming
Educational Facilities
Fitness Centers
Government
Healthcare
Hospitality
Retail & Professional
Restaurants
Senior Housing
Mulit-Family Housing

 

AMBIENT HEATING & COOLING
GRAND FORKS & FARGO

CALL 701.757.1294

Interested in up to 70% in heating & cooling savings?

VISIT OUR GEOTHERMAL SITE NOW!

 
 

Contractors as well as business owners choose Ambient Heating & Cooling for commercial HVAC installation because our highly trained professionals  install quality systems to our customers satisfaction.


Let us outfit your commercial or residential building with the most efficient and environmentally friendly source of heating and cooling available today. Ambient Geothermal has been an industry leader for years.



With our well-known customer support and exceptional quality work, Ambient Heating & Cooling is the ideal resource for your home HVAC needs.



   
 
Contact us today with any heating and cooling questions you may have. Ambient Heating & Cooling provides prompt, reliable, quality heating and cooling service and installations in the Grand Forks - Fargo area. 701-757-1294

 

 

 

Ambient Heating & Cooling

Serving Grand Forks / Fargo Area  

Phone:  701-757-1294

 

BBB_web_Spot7469

 

 
Phone:  701-757-1294 | NuttyHost Web Design